Last Updated: 11/16/2019 @ 07:39 am
Member Credit: Theslaking
Grabbed a Nissan mirror with LCD from an 09+ Rogue. It was as simple as running wires in a vehicle I already had gutted. At first, I tapped into power upfront from the mirror but that caused too much of a delay with the camera turn on. So I just grabbed it in the back.
Power for the LCD still came from the original harness
Ran the wires to the back. You can see the cut camera power wires
Down into the trunk. Put some Ensolite around the wires to prevent rubbing.
Into the factory loom and through the trunk lid.
Drilled a hole in the plastic popped in a grommet
Finished look.
Screen showing old reliable!
Facebook Comments
Comments are closed.