1995-1999 How to Remove ECU and Replace Air Mix Door Actuator

Credit: Vladimir_K

1. To remove ECU the 4 Philips screws should be removed: 2 from rear side and 2 from front side. But it will be still difficult to remove Air Mix Door Actuator. The next step is cutting out all plastic clumps holding electric cables on the ECU frame.
2. Final step is removing the ECU frame: take out 2 (10 mm) bolts from rear side. There is no mount bolts for a front part of ECU frame (just pull out central plate by shifting frame back/rear).
3. Someone may find useful to cut out some parts of the ECU frame. (Pictures attached) And use parts of the plastic rings (from 1/4 tube) for holding the 3 screws inside of holes of actuator.