Community Member Credit: Matt Blum / Eddie James Gomez
Did my z32 brake conversion. I have a 1996 gloria, with the vq30det. I only needed to add one tiny washer for spacing, I’m pleased. My heat Shields were already gone, and I used the 240 conversion lines. I did not have to trim bolts, or sleeves, or anything. I used the 30mm aluminum calipers. The factory calipers are so much smaller! I’ll do the rears eventually, the rotors back there are new from the PO in Japan.
Additional Notes:
- You can do this with the g35 brembo which is a straight bolt in ,you do need shorter bolt for the caliper
Facebook Comments
Comments are closed.