Community Member Credit: Eddy
I went to move my car and noticed the cluster was not working. It was lit but it didn’t show any of the numbers and gauges were at zero. I also noted my reverse camera and reverse lights were not working. I used this article on our site to resolve the issue: https://www.my4dsc.com/5thgen-nissan-maxima-10amp-meter-fuse-reference-info-why-it-keeps-blowing/. However, I wanted to make my own version of it.
Symptoms:
- Limp Mode
- No Reverse Lights
- No Dash lights or mileage displayed
- Kept blowing 10 AMP Meter Fuse Consistently
Tried:
- Swapped ECU to confirm not ECU
- Tried New Bulb, Didn’t work
Actual Solution:
- First unplugged the mirror to see if the fuse would blow and it didn’t. I put on a new mirror and all was good.
- https://www.my4dsc.com/5thgen-nissan-maxima-10amp-meter-fuse-reference-info-why-it-keeps-blowing/
Fuse to Check/Replace: 10A METER
The Culprit
You can see the burnt mark on the mirror connectors. I just replaced it with a spare that I had. You can find them on eBay for around $20-$30 bucks shipped.
Facebook Comments
Comments are closed.