Blehmco Kit:

• Z32 Calipers
• 2004 6thgen Maxima Rotors
• Relocation brackets
• Conversion Lines

Jeff92se Kit:

• z32 calipers
• Cobra rotors
• relocation brackets
• center rings
• conversion lines

Z32 Direct Rotor Swap:

• Z32 calipers
• Z32 rotors (must be milled down)
• conversion lines.

Additional Info: You have to mill down the diameter of the rotor, not the friction surface. the same would go for 5th gen rotors.. just because they’re 26mm thick rotors doesn’t mean they bolt right on. you have to worry about offset from the hub and inner and outer friction surface diameter. thus you would be better off to just use 26mm 300ZX rotors and mill them down 3mm and call it a day if you want to go that way.

For all the setups you will need to remove the dust shield, Obtain hardware, and calipers and rotors must be for the same setup, either 26mm or 30mm. These parts are not interchangeable.

Front Rotor Size Reference:

• 6th Maxima = 12.6 = 320mm
• 350z =12.75 = 324mm
• Cobra = 13.1 = 330mm
• Akebono = 14 = 355mm