Credit: Bishnu Dinanauth / secondtonone317
Don’t know if this was posted before but…I used a DEK fuel rail on a 3.5 to utilize the return line. It was a cheap and easy way out for me since I did not want to go looking for another option and use what I had.
First, I shaved the tabs off my DEK rail and marked the mounting tabs, and trimmed them so the rail would drop in.
Little clearance issue with the UIM, it cleared but touched
I marked it and shaved it down a little
Then I made some brackets to apply pressure to the original tabs that do not line up with the 3.5 LIM to hold it in place.
I think I will cut where I made the red mark in the pic below and put a rubber tube there as it has on the 4th gen fuel rail to give it some more flexibility.
Comments are closed.