my4dsc.com – Premier 4-Door Sports Car Source!
Category

allGens

Category
allGens

Nissan DataScan II aka The Affordable Nissan Consult

If you are DIY person and love working on your Nissan Maxima, then this tool is a MUST HAVE! When you go to the Nissan dealer, the person working on your car typically uses a tool called a Nissan Consult. The Nissan Consult that the dealer uses costs thousand of dollars and is only available to dealers. By using the Nissan DataScan software, a laptop and a generic VAG COM OBDII adapter you can achieve just about the same level of on-board diagnosis that $5,000 Nissan Consult provides. This software allows you to:

  • Check CEL codes
  • Check/Reset ABS and SRS-Airbag Faults
  • Check/Reset TCM Codes
  • Adjust timing
  • Perform Idle Air Relearn
  • Reset ECU learned settings
  • Data-log
  • Program keys
  • Check Emissions Readiness Monitors
  • Active Test temporary modify some of the engine parameters for testing purposes
  • And Much much more….

The software itself costs $55.00 and generic cable costs around $7.00-$8.00. 

Software License Purchase Link: Nissan DataScan II

Software Download Links:

OBD2 Cable Order Links: 

You can find the cables on eBay between $12.00-$20.00 shipped. It ranges based on location and shipping. Search for the following keywords on eBay and you will find it: “KKL 409.1 VAG-COM OBD2 USB Cable”

Below are all the functions it provides:

ECU Part Number

This is the main window of the NDSII software which shows the ECM Nissan Identification part number. Basic and Advance Functions can be selected by clicking on the buttons, using the shortcut keys (F1 – F11) or using the Menu bar. Most functions except Data Replay and Log Analyser are disabled until communication with the ECU is successfully established.

Progress bar at the bottom indicates communication between the ECU and PC. If the bar is not moving there is no data being received from the ECU.

Data Display Settings

This window is used to assign parameters to be displayed by the Data Display function. Only parameters that are supported by the currently connected ECU are available for selection. Gauges are counted from left to right, top to bottom. Multiple gauges can monitor the same parameter.

Data Logging ECM

Selected parameters can be logged to a file. This function can also be accessed from the Data Display window. The data log file can be analysed using the Data Replay or Log Analyser functions.

Self Diagnostics ECM

Self Diagnostics function allows users to read and reset engine ECU error codes.

Idle Adjustment

Idle Adjustment function allows users to adjust the base idle RPM. The setting is saved to the ECU and it does not reset with engine restart.

Timing Adjustment

Timing Adjustment function allows users to adjust the base ignition timing. The setting is saved to the ECU and it does not reset with engine restart.

Active Test ECM

Active Test allows users to temporary modify some of the engine parameters for testing purposes. They return to their original values when a function is stopped, PC disconnected or engine restarted.

Note: It is possible to damage the engine if the A/F Base % functions is used to excessively modify fuel delivery. Likewise the engine may overheat if the Engine Temperature is set to low for a long period of time. Do not use those functions if you are not sure how they will effect your engine.

Work Support

Work Support functions allow users to perform some of the advance service procedures. Those procedures may need to be performed after replacement parts are installed.

Clear Self Learn – clears the A/F Base SL map learned by the ECU.

Idle Air Volume Learn – is an operation to learn the fully closed position of the throttle valve.

Program Immobiliser Key – allows to register the Nissan transponder keys with the Immobiliser Note: The immobiliser security PIN CODE needs to be known. Initially all registered keys will be erased and all keys will need to be reregistered.

Cylinder Power Test

Cylinder Power Test function can be used to identify cylinder that is under performing. This function allows shutting down individual cylinders. If all of the cylinders are producing the same amount of power the engine RPMs will drop exactly the same amount on each cylinder that is cancelled.

Log Analyser is used to review log files previously generated by with Data Logging function. Graphs are drawn by selecting boxes next to parameter value. Graph colours match the parameter value colours.

Speed Test

Speed Test is a unique function for measuring car’s acceleration performance. Predefined or user specific tests can be used. Due to the low resolution of Nissan speed sensors, measurements should only be used as a guide and not a true reflection of car’s performance.

Note: This function should not be used while driving on public roads.

Address Watch

Address Watch function is used for monitor specific ECU memory addresses. By monitoring a memory address extra information can be retrieved that is not normally available using Consult II protocol. A knock sensor reading can be obtain using this method if knock sensor memory address is known.

Wideband O2 sensor

Nissan DataScan II also supports wideband Air/Fuel ratio meters from Innovate Motorsports. A second serial port is used to connect to the controller and collect data.

The data from the wideband meter can be displayed or logged in conjunction with other engine parameters using the Data Logging function.

ECU Part Number BCM

The BCM tab shows the BCM Nissan Identification part number. Basic Functions can be selected by clicking on the buttons or using the Menu bar. All functions are disabled until communication with the ECU is successfully established.

Progress bar at the bottom indicates data being send between the ECU and PC. If the bar is not moving there is no data being received from the ECU.

Note: Some vehicles may use K line for diagnostics of engine ECU (ECM) but still use DDL1 line for diagnostics of other control modules. This software does not support diagnostics over the DDL1 line. Some of those models are: X-trail, Maxima, Patrol.

Self Diagnostics BCM

Self Diagnostics function allows users to read and reset BCM error codes.

Active Test BCM

Active Test allows users to temporally activate some of the functions of the BCM. This is usually used to manually test the functionality of the systems controlled by the BCM.

Note: Functions not supported by the BCM are disabled (grayed out).

ECU Part Number TCM

The TCM tab shows the TCM Nissan Identification part number. Basic Functions can be selected by clicking on the buttons or using the Menu bar. Most functions except Data Replay and Log Analyser are disabled until communication with the ECU is successfully established.

Progress bar at the bottom indicates data being send between the ECU and PC. If the bar is not moving there is no data being received from the ECU.

Note: Some vehicles may use K line for diagnostics of engine ECU (ECM) but still use DDL1 line for diagnostics of other control modules. This software does not support diagnostics over the DDL1 line. Some of those models are: X-trail, Maxima, Patrol.

Data Logging TCM

Selected parameters can be logged to a file. This function can also be accessed from the Data Display window so the data can be logged while it is displayed. The data log file can be analysed using the Data Replay or Data Analyser functions.

Self Diagnostics TCM

Self Diagnostics function allows users to read and reset TCM error codes.

ECU Part Number ABS

The ABS tab shows the ABS Nissan Identification part number. Basic Functions can be selected by clicking on the buttons or using the Menu bar. Most functions except Data Replay and Log Analyser are disabled until communication with the ECU is successfully established.

Progress bar at the bottom indicates data being send between the ECU and PC. If the bar is not moving there is no data being received from the ECU.

Note: Some vehicles may use K line for diagnostics of engine ECU (ECM) but still use DDL1 line for diagnostics of other control modules. This software does not support diagnostics over the DDL1 line. Some of those models are: X-trail, Maxima, Patrol.

Data Logging ABS

Selected parameters can be logged to a file. This function can also be accessed from the Data Display window so the data can be logged while it is displayed. The data log file can be analysed using the Data Replay or Data Analyser functions.

Self Diagnostics ABS

Self Diagnostics function allows users to read and reset ABS error codes.

Work Support ABS

Work Support functions allow users to perform advance service procedures. Those procedures may need to be performed after replacing parts.

Steering Angle Sensor Reset – After removing/installing or replacing VDC/TCS/ABS control unit, steering angle sensor, steering components, suspension components, and tires, or after adjusting wheel alignment, make sure to adjust neutral position of steering angle sensor before running vehicle.

ECU Part Number SRS

The SRS tab shows the SRS Nissan Identification part number. Basic Functions can be selected by clicking on the buttons or using the Menu bar. All functions are disabled until communication with the ECU is successfully established.

Progress bar at the bottom indicates data being send between the ECU and PC. If the bar is not moving there is no data being received from the ECU.

Note: Some vehicles may use K line for diagnostics of engine ECU (ECM) but still use DDL1 line for diagnostics of other control modules. This software does not support diagnostics over the DDL1 line. Some of those models are: X-trail, Maxima, Patrol.

Self Diagnostics SRS

Self Diagnostics function allows users to read and reset SRS error codes.

Note: Recorded faults are historical and can not be cleared.

Work Support

Work Support functions allow users to perform the advance service procedures. Those procedures may need to be performed after replacement parts are installed.

Program Immobiliser Key – allows to register the Nissan transponder keys with the Immobiliser Note: The immobiliser security PIN CODE needs to be known. Initially all registered keys will be erased and all keys will need to be reregistered.

OBDII Self Diagnostics

OBDII Self Diagnostics function allows users to read and reset ECU error codes.

OBDII Monitor Status

OBDII Monitor Status shows the current status of various monitoring systems used by the car’s engine management system.

OBDII Log Analyser

Log Analyser is used to review log files previously generated by with Data Logging function. Graphs are drawn by selecting boxes next to parameter value. Graph colours match the parameter value colours.

OBDII Fuel System Satus

OBDII Fuel System Status can be used to check if the car’s fuel system is running in Closed Loop mode.

Fuel systems do not normally refer to injector banks. They are intended to represent completely different fuel systems that can independently enter and exit closed loop fuel. Banks of injectors on a V-engine are generally not independent and share the same closed-loop enablement criteria.

OBDII Data Logging

Selected OBDII parameters can be logged to a file. The data log file can then be analysed using the Log Analyser function.

Due to the slow nature of OBDII protocol it’s recommended to log only the required parameters.

Loading

Keep Reading
By
allGens

Why the Car Scene can be Toxic? [Don’t Let it Phase You]

Source Credit: Via Facebook

The car scene can be toxic.

Let me explain why…

Long gone are the days where you can build a car how you want it and not receive negative comments towards you and the car.

Buy a new exhaust? Too loud. Sounds like shit. Sounds like [insert instrument here]. Sounds slow. Why didn’t you go with ABC?

Post dyno numbers up? Fake numbers. You’re going to blow your engine up. Way underpowered. My car makes way more HP. Let’s race. Prove those numbers because they’re obviously fake.

Do some exterior/interior mods? HAHA! Wow that looks horrible. Why did you do that? Who does that to [insert your car here]?

There is no more respect in the car community. Everybody’s prerogative is to berate or throw negative comments at other people who are building/modifying/customizing their car to how they want it. They’re not customizing their car to make you happy.

If you don’t like what somebody posts up about their car, or shows off something they’ve done, why even comment? Why does it make you feel good to put other people down?

Why make remarks to make fun of somebody’s work? They probably thought about what they wanted to do, put in the time and money to do it, and now they have it.

It’s just a show of character on yourself when you can’t even say anything nice about what somebody has done.

It’s an equal show of your character if you make a react on a post that talks down or makes fun of somebody else.

Just let the person who is doing custom work be. Let them enjoy their car. No need to make stupid reacts to what he posts or berate/belittle them.

Be an adult. Act your age.

In the end, I’m going to continue to keep doing me, whether anybody likes it or not. I’m going to do what makes me happy, because in the end, being happy with whatever you decide to do with your car and your build is all that really matters. 💯

Copy and paste if you agree.

Loading

Keep Reading
By
allGens

VQ35 HR vs DE Head Flow (Comparison / Flow Testing)

Member Credit: SGSash / onpointdyno

I just picked up my HR heads from Gord Bush who cleaned them up for me and flow tested them. We of course have previous numbers from the non-revup heads that I had Gord Bush port – so let’s compare! Visually looking at the HR heads you can see just how much bigger the intake port is than the non-revup heads, and the numbers prove it – the HR heads flow the same as the ported DE heads (in fact substantially more at low valve lifts). The exhaust doesn’t flow quite as well as the ported DE exhaust did, but it is still substantially better than a stock DE at high lifts.

Stock VQ35DE heads on the flow bench, very similar looking to the HR exhaust ports

Stock DE intake ports on the flow bench, substantially different than the HR

One reason the exhaust flows less at low valve lifts may be due to the fact that the HR has smaller valves. While this may be counter intuitive to those of you that go out there and buy the biggest valves you can, a smaller valve shrouds the combustion chamber less, and in-fact promotes flow at higher lifts. My imagination tells me you want the smallest valve and biggest port you can get away with, without overheating the valve.

Once these HR heads are ported, we should be able to get a decent bit more exhaust flow and hopefully crack the 400whp barrier with shorter intake runners and exhaust runners.

 

Loading

Keep Reading
By
Tuning

How to Tune your Nissan/Infiniti ECU using Rom Raider and Nisprog/Kern (for only $10)

Member Credit: Matt Riney

For all you hardcore Nissan/Infiniti enthusiasts, there is finally an open-source solution that allows you to modify and flash ECUs! With a $10 VAG-KKL cable, you can basically flash your own ECU and tune it your to personal comfortable without breaking your wallet. The average tune costs roughly $600+ these days. Since you’re modifying the ROM yourself, there’s no vendor lock-in and you are free to do what you need and want. Great for those who have knowledge of tuning and want to tune their own vehicles!

Applicable Vehicles: 

  • 2000-2001 5thgen Nissan Maxima
  • 2003-2003 5.5gen Nissan Maxima
  • 2004-2008 6thgen Maxima
  • 2009 7thgen Maxima
  • 2002-2004 Nissan Altima
  • 2005-2006 Nissan Altima SE-R
  • 2003 Infiniti G35
  • And various others……

Links to Tool/Software that you will need (Click links to Download):

Below are helpful videos on installing and running Rom Raider, along with dumping a Nissan SH7055 ECU with the Nisprog/Npkern software.

  • Kernel 7055_35 is used by the early ecus 2002 & 2003 Maxima (and 2004 in most cases).
  • Kernel 7058 is used for 05+ Maxima
  • It’s all based on the ROM size. If the ROM size is 512K then  you should use the 7055_35 kernel. If the ROM size is 1024K then you use the 7058 kernel.

Cars Tuned on ROMRaider / Nisprog

5.5 Gen Maxima Tuned by AdminTuning VQ35 Bolt Ons

Shaquille Jenkins 5.5 Gen Maxima Gen2 VQ35DE

Trevon Walters 4thgen Maxima Hits 11.77 (All Motor) Gen2 VQ35DE

Which ECUs Will This Work On?

Most gasoline Nissan / Infiniti ECUs from ~ 2002 onwards share very similar ECU hardware, based on SuperH microcontrollers manufactured by Renesas (previously Hitachi). This project supports ECUs that use the OBD-II “K line” signal for diagnostics communications.

How Does the Reflash Process Work?

The process is carried out entirely over the OBD-II “K Line” serial communications link through an undocumented set of manufacturer-defined extensions to the standard ISO14230 protocol. Recently, the necessary commands have been reverse-engineered revealing the required steps:

  1. Establish connection to the ECU.
  2. Send the first stage data payload: this is the “kernel”, a simple program that will receive commands and data for the reflash.
  3. Make the ECU run the kernel. From this point on, the kernel runs from RAM and effectively takes control of the whole ECU.
  4. Send the reflash commands and new firmware data to the kernel.
  5. Reset the ECU: the new firmware will now be executed, and the kernel will be completely removed.

Kernel Features

The basic kernel is an implementation of an ISO14230-compliant protocol with extensions. It implements the following requests:

  • Fast ROM dump (tested up to 5.4 kB/s; typical speed is ~100 B/s without a kernel)
  • Read ROM/RAM/external EEPROM
  • Write to RAM
  • Erase flash ROM block
  • Write flash ROM block

Requirements

The basic reflashing kernel will support gasoline ECUs with:

  • SH7055 or SH7058, 0.18um microcontrollers (the most common types)
  • K line wired to the OBD-II connector pin 7
  • Unfortunately CAN-only ECUs are not currently supported.

Host computer:

  • OS: Linux and Windows are known to work; Nisprog is based on freediag source code which is cross-platform and should run on most Linux/UNIX flavors.
  • Connectivity: a simple USB-OBD adapter is required. These are the “Generic dumb serial adaptors” described in the freediag docs.

OBD2 KKL VAG-COM 409.1 USB Cable

Limitations

There are several important points to be aware of when using Nisprog:

  • The ECU is a safety-critical system in a car. Reflashing an ECU can void warranties, reduce the vehicle’s reliability, and cause a whole variety of undesirable consequences. Use of this project and any associated tools (freediag, Nisprog, etc) is of course entirely at the user’s risk. Standard disclaimers apply.
  • Reflashing an ECU may be illegal in some areas. Responsibility in this matter lies again with the user.
  • Diesel ECUs are not supported, they are entirely different.
  • Tuning and modifying ROMs are complex skills that can only be acquired through significant investments of time and effort!

Loading

Keep Reading
By
allGens

What Does the LH and RH on Car Parts Stand For?

When looking for parts, you usually refer to them as driver side or passenger side. However, there are often times where all you see is either an “LH” or “RH“. While it may seem self-explanatory, there are some people who get it confused and end up ordering the wrong parts. So here’s what they mean (for USA based vehicles):

LH = Left Hand (Driver Side)

RH = Right Hand (Passenger Side)

Example: The fender below says RH. This means it’s for the “Right Hand Passenger Side”.

Loading

Keep Reading
By
Load More