Member Credit: Eddy
- Disconnect battery negative terminal.
- Remove the CVT finisher.
- Place the shift lever in the Drive position.
- Separate the chrome finisher from the shift knob by pushing it down.
- Remove the shift knob (1) by removing the spring clip and pulling up. Then remove the chrome finisher (2).
- Set the parking brake.
- Pull up to release the clips and remove CVT finisher.
- Disconnect the bulb housing from the assembly.
- Pull up on the rear portion of cluster lid C, once the 4 bottom clips are disengaged, pull rearward to release molded clips at the top of cluster lid C.
- Disconnect the electrical connectors.
- Remove front air control, storage bin, hazard switch, aux in jack, and power outlet.
- Remove cluster lid D screws using power tool.
- Pull cluster lid D toward rear of vehicle to release clips.
- Disconnect the electrical connectors.
- Remove the audio switch (if equipped) and the center vent ducts.
- Remove the screws (1), disconnect electrical connectors and remove the center stack (2).
Facebook Comments
Comments are closed.