Last Updated: 04/10/2021 @ 08:38 am

Community Member Credit: Robert Mandru

These brackets will guarantee the proper fitment of Akebono calipers on your Maxima or Altima. Say goodbye to pad overhang and knocking off wheel weights when running your 18s!

The kits will be made out of 6061 high-strength aluminum. I am currently in talks with the machinist to see if I can do a separate run of steel brackets though. I was quoted $45 USD more (subject to change).

The aluminum kits will cost $225 plus shipping and PayPal fees. ($50.00 Deposit Required)

Important Note: These brackets for only for the front calipers. The rear Akebono calipers are plug-n-play but only for the 04+ Maximas/ 05+ SE-R Altimas.

Improvements (Over Previous Brackets):

• Mounting holes to the knuckles have been shifted to the correct spots to fix the pad overhang problem.
• A notch has been made to clear the curvature of the caliper as it was not allowing it to seat on the bracket properly.
• The caliper mounting holes were oversized. This is also corrected.